$productPageCompatible
- danska (Danmark)
- tyska (Österrike)
- tyska (Tyskland)
- engelska
- engelska (Australien)
- engelska (Kanada)
- engelska (Storbritannien)
- engelska (Irland)
- engelska (Amerikas Förenta Stater)
- spanska (Spanien)
- finska (Finland)
- franska (Belgien)
- franska (Kanada)
- franska (Frankrike)
- italienska (Italien)
- nederländska (Belgien)
- nederländska (Nederländerna)
- norska (Norge)
- svenska (Sverige)
Grapple saw
MG12—MG20
For excavators weighing 7—26 tons
The grapple saw is a powerful tool and a great choice for you and your excavator. If you work in urban environments or in confined spaces with your excavator, this is a perfect complement to your tiltrotator.
Now you don’t have to climb trees or poles or use a platform to work near power lines. Instead, stay within the safety of the cab and connect the grapple saw with EC-Oil, cut your branches and lower them to the ground safely and securely. You save time and money!
- Automatic chain tensioning and proportional lubrication system.
- Fast and easy saw bar and chain replacement.
- SuperCut minimizes down time and increases productivity.
- Built in bar feed cylinder.
- Sequence controlled saw function.
- Saw activating valve included.
- Simple installation on excavator.
- Prepared with EC-Oil. *
* To operate both grapple and saw requires two EC-Oil blocks.
The illustration shows a typical configuration. Technical data may vary.
We reserve the right to make changes without prior notice.
- EC-Oil Ready
Imperial
Metric
- Grab width A, min [mm]: Grab width A, min [inches]: 82 3,2
- Grab width A, max [mm]: Grab width A, max [inches]: 1,496 58,9
- Width B [mm]: Width B [inches]: 454 17,8
- Height C [mm]: Height C [inches]: 910 35,8
- Weight [kg]: Weight [lbs]: 315 694
- Grab area [m²]: Grab area [inch²]: 0,26 423
- Max hydraulic pressure [MPa]: Max hydraulic pressure [psi]: 25 3,626
- Max load [kg]: Max load [lbs]: 6,000 13,228
- Fits hitch: Fits hitch: S45 S45
- Base machine weight [t]: Base machine weight [lbs]: 7–12 15,400–26,400
- Grab width A, min [mm]: Grab width A, min [inches]: 82 3,2
- Grab width A, max [mm]: Grab width A, max [inches]: 1,496 58,9
- Width B [mm]: Width B [inches]: 454 17,8
- Height C [mm]: Height C [inches]: 910 35,8
- Weight [kg]: Weight [lbs]: 315 694
- Grab area [m²]: Grab area [inch²]: 0,26 423
- Max hydraulic pressure [MPa]: Max hydraulic pressure [psi]: 25 3,626
- Max load [kg]: Max load [lbs]: 6,000 13,228
- Fits hitch: Fits hitch: S60 S60
- Base machine weight [t]: Base machine weight [lbs]: 12–19 26,400–41,800
- Grab width A, min [mm]: Grab width A, min [inches]: 179 7
- Grab width A, max [mm]: Grab width A, max [inches]: 2,279 89,7
- Width B [mm]: Width B [inches]: 531 20.9
- Height C [mm]: Height C [inches]: 1,163 45,8
- Weight [kg]: Weight [lbs]: 560 1,234
- Grab area [m²]: Grab area [inch²]: 0,52 806
- Max hydraulic pressure [MPa]: Max hydraulic pressure [psi]: 25 3,626
- Max load [kg]: Max load [lbs]: 10,000 22,046
- Fits hitch: Fits hitch: S70 S70
- Base machine weight [t]: Base machine weight [lbs]: 19–26 41,800–57,300
System engcon
What is most important for you?
World leading
We do everything necessary to create a complete package so our customers get the most out of their machines. We have dealers and service points are around the world.
Total concept
engcon's total concept makes your excavator more efficient. We supply safe products that turn your excavator into a flexible, profitable part of your operation.
Flexibility
The tiltrotator's ability to tilt and rotate makes the machine a good all-rounder that carries out most tasks with greater precision.
Efficiency
Fewer machine movements and faster jobs mean less wear on the machine.
References
-
Cole Gailor, Gailor Ground and Earthworks LLC
Cole Gailor
Gailor Ground and Earthworks LLC
-
EC-Oil is great, I can't live without it.
Tom Gardocki
New Era Excavation
-
I was able to do larger jobs in less time with fewer employees.
Ben Rathjen
Rathjen's Landscaping Inc
-
The EC-Oil single handedly takes engcon to another level.
Brian Dietz
Bob Dietz and Sons Inc
-
We turned a three-day job into a one-day job.
Andrew Marchion
Marchion and Fauster
-
A machine without a tiltrotator to me is worthless
Peter Overlock
Earthwork Artist, Maine
-
30-40% increased efficiency and higher quality of work
Tom "Pro" Prochazka, Gravity Logic
-
“When you add an Engcon to an excavator, there isn’t much you can’t do with it”
Brian Dietz, Bob Dietz and Sons
-
“It’s faster than I could ever work before”
Matt Guerra, JP Guerra
-
As soon as I saw a tiltrotator in action, I realized the advantages!
Tyler Scovill, Scovill’s Landscape Contractors
-
One machine for many different jobs
Turk Harrison
-
engcon has helped us grow – we’ve almost doubled in one year
Quentin Green, Green & Sons
404 - Page not found
We couldn't find the page you're looking for.
An error has occurred
Try downloading the page again to see if the error recurs.
An error has occurred
We could not connect you to the Internet