Compactor (low-flow)
engcon compactors are easily adaptable for the EC-Oil automatic oil connector system and can thus be connected without the operator having to leave the cab.
- Low flow requirement (9.25 gallons) allows the PP3200 to be run directly off the extra connections on the tiltrotator.
- Variable working width.
- Specially adapted compactor pads.
- Compaction plate in hard-wearing steel.
- Side plating for leveling-off filler material.
- Open short ends to facilitate clearing the top of the plate.
- Joined with rubber elements located for effective insulation of the vibrators combined with adequate stiffness for grading.
- The vibrator unit and hydraulic parts are well-protected inside the side plates.
- Can be fitted with optional bracket.
- Complies with European safety standards.
Accessories: Extension plates, trenching blade, specially adapted compactor pads for e.g. packing in sheet-pilings.
The illustration shows a typical configuration. Technical data may vary. We reserve the right to make changes without prior notice.
Technical specifications
PP3200 | |
|---|---|
Width (inch) | 19.7–27.6 |
Height (inch) | 23.2 |
Length (inch) | 39.4 |
Weight, excluding adapter (lbs) | 1,040 |
Recommended hydraulic flow (gal/min) | 9 |
Compaction area (inch²) | 15.7–22.0 |
Compaction force (lbs) | 7,050 |
Max hydraulic pressure (psi) | 3,200 |
Frequency (Hz) | 31 |
Max continuous return hose pressure (psi) | 145 |
Quick coupler standard | S45 |
Base machine weight (lbs) | 13,200–26,400 |
Product sheet
User manual
Profitability
Working with a tiltrotator saves time, cuts the fuel consumption, reduces the need for manpower and machine wear, and the precision of the manoeuvres makes you waste less material.
Safety
A tiltrotator also increases safety around the machine due to its high manoeuvrability and low space requirements. It significantly reduces the need for manual work, for instance the use of shovels and rakes.
Flexibility
The tiltrotator easily tilts and rotates attachments as required, regardless of the machine’s position. In addition to ordinary buckets, the machine can also be fitted with many different tools and replace several other machines at the same work site.
Environment
The reduced need to move the machine around means greatly reduced environmental impact by cutting fuel consumption and at the same time less damage to the ground. Since you can dig around obstacles and in narrow spaces, there’s less need to move obstructing objects.
Comfort
With a tiltrotator and EC-Oil system, the operator retains control and comfort in the working environment without leaving the cabin to attach hydraulic tools, which also increases safety.
404 - Page not found
We couldn't find the page you're looking for.
An error has occurred
Try downloading the page again to see if the error recurs.
An error has occurred
We could not connect you to the Internet