New 2-series tiltrotators
engcon is the world's leading manufacturer of tiltrotators, and the new 2-series generation is setting a new standard.
The new tiltrotators span the entire range of excavators from 2 metric tons to 26 metric tons and have a number of advantages which further increase profitability and excavator flexibility.
The 2-series tiltrotators have everything that made their predecessors so popular – but are even better. On the EC209-EC226 models, the hydraulic motor is well protected on the left-hand side and is visible to the driver. The strengthened frame has radically improved performance. The EC219, for example, has 37 per cent greater breakout force and 27 per cent higher torque than the equivalent tiltrotator in the B-series.
All tiltrotators come with central lubrication and are designed to be as easy as possible to service. The tilt function has increased to 45 degrees, so enhancing flexibility.
An increasing number of tools also require increased hydraulic flows at extra attachment points. The larger tiltrotators – EC214, EC219 and EC226 – are therefore equipped as standard with a new swivel that allows higher flows. With an NG10 valve, it delivers flows of up to 120 liters per minute, making it possible to operate tools requiring high flow rates on extra attachment points. In addition, the new swivel is adapted for an electric "channel", as the tiltrotators will, in the long term, be fitted as standard with engcon's new Q-Safe quick hitch lock – which has won awards for its innovation and outstanding safety.
- All EC02, EC204 and EC206 models, regardless of control system, are fitted with check valves on the tilt cylinder. This is because they only have one tilt cylinder and in the event of, for example, a hose breach no other cylinder remains to act as a "brake".
- Other models: EC209, EC214, EC219, EC226, EC30 are fitted with load-bearing valves as standard (2 per cylinder) on models with the SS9 (4-hose) system and other models are prepared for fitting load-bearing valves.
- All tiltrotators are fitted with tight hose protection that prevents oil from spraying out to the side, for example in the event of a hose breach.
- Q-Safe™ functions independently of the tiltrotator control system and is prepared for EC-Oil, which allows automatic connection of electrical circuits, central lubrication and hydraulic tools.
- Q-Safe™ safety locking is dimensioned to cope with full excavation forces in all directions.
- The locking cylinder is dimensioned and calculated to handle the maximum hitch opening force that can occur through external excavation forces, with the applicable machine size.
- The locking surface angle, in relation to the excavation forces, is 90 degrees or more throughout the entire maneuver, which means that the excavation forces constantly seek to close the hitch.
- Q-Safe™ meets current safety standards: EN474, SS-EN ISO 12100-1 and the future ISO 13031 standard.
404 - Page not found
We couldn't find the page you're looking for.
An error has occurred
Try downloading the page again to see if the error recurs.
An error has occurred
We could not connect you to the Internet