Choose market region and language
  • Sweden
  • Australia
  • Austria
  • Belgium
  • Canada
  • Denmark
  • Finland
  • France
  • Germany
  • Ireland
  • Italy
  • background Layer 1
  • South Korea
  • Netherlands
  • Norway
  • Spain
  • United Kingdom
  • United States
  • International


Suitable for all excavators in the 14–19 tonne weight class

A compact, powerful tiltrotator with low weight and height for excavators up to 19 tons. If the EC219 is selected with engcon’s standard quick hitch S60 and the DC2 proportional control system, EC-Oil is offered an automatic quick hitch system as a standard. This means that the tiltrotator and hydraulic tools can be connected and disconnected without the operator needing to leave the cab.


  • The EC-Oil automatic quick hitch system connects the tiltrotator and hydraulic tools without the operator needing to leave the cab
  • Q-Safe quick hitch for high safety
  • Comes ready for detachable grab GRD (S60)
  • Comes ready for rotating brush SWD (S60)
  • Comes ready for the QSC locking system to avoid wrongly connected or dropped buckets
  • Comes ready for a rotation sensor (ePS) for connection to the excavator guidance system
  • Central lubrication (a single grease point for the entire tiltrotator; can also be connected to the excavator’s central lubrication system)
  • Load-holding valves on tilt cylinders for high safety
  • Hardened piston rods
  • Up to ± 45-degree tilt angle for best access
  • Rotation ∞

Quick hitch: Standard – S60. For other purposes there are a few other hitch types available.

Control system: Standard – DC2 proportional control system for infinitely variable control with remote support capability, track/wheel steering and boom slew. For other purposes, we can deliver custom control systems.

Electrical system: Can be adapted for 12 or 24 volt electrical systems.

Accessory: GRD detachable gripper cassette, SWD detachable rotating brush.

The illustration shows a typical configuration. Technical data may vary.
We reserve the right to make changes without prior notice.

Technical specifications



  • Width A [mm]: Width A [inches]: 396 15.6
  • Width B [mm]: Width B [inches]: 315 12.4
  • Width C [mm]: Width C [inches]: 310 12.2
  • Total length D [mm]: Total length D [inches]: 737 29
  • Build height E [mm]: Build height E [inches]: 480 18.9
  • Tilt [°]: Tilt [°]: 2x45 2x45
  • Weight [kg]: Weight [lbs]: 550 1,212
  • Max bucket width recommended by engcon [mm]: Max bucket width recommended by engcon [inches]: 1,700 66.9
  • Rec hydraulic flow DC2/SS10 [l/min]: Rec hydraulic flow DC2/SS10 [gal/min]: 120 31.7
  • Rec hydraulic flow SS9 tilt/rotation [l/min]: Rec hydraulic flow SS9 tilt/rotation [gal/min]: 65/70 17.2/18.5
  • Max hydraulic pressure [MPa]: Max hydraulic pressure [psi]: 22 3,200
  • Max breakout torque [kNm]: Max breakout torque [lbf]: 186 137,187
  • Standard mounting: Standard mounting: S60 S60
  • Base machine weight [t]: Base machine weight [lbs]: 14–19 30,900-41,900

System engcon

What is most important for you?


System engcon, centred around the tiltrotator, saves both time and fuel.


Fewer machine transits and less need for manual work increases safety at the workplace.


The tiltrotator's ability to tilt and rotate makes the machine a good all-rounder that carries out most tasks with greater precision.


Fewer machine movements and faster jobs mean less wear on the machine.

404 - Page not found

We couldn't find the page you're looking for.

An error has occurred

Try downloading the page again to see if the error recurs.

An error has occurred

We could not connect you to the Internet