The tiltrotator increases safety when working on the railway, and maximizes efficiency.

The tiltrotator increases safety when Working on railways with an excavator places enormous demands. Safety is the prime factor and it is here that engcon contributes with vital solutions. Using an engcon tiltrotator you transform your excavator into a flexible, efficient AND safe tool carrier.

A rail-bound machine has a limited scope of movement, and especially in lateral motion. With engcon's tiltrotator you can carry out lots of tasks that would have been impossible earlier. Just imagine a scenario as simple as excavating between two sleepers – easy... Drive the excavator to the required position, rotate the narrow bucket or grab at a 90 degree angle and dig sideways-on. A task that would be unthinkable without a tiltrotator.

A tiltrotator on the excavator allows offset excavation from the rails, along the rails; work on inclines is made possible and a fork frame can be used to handle goods and a grab attachment can be used to lift materials.

All of this can be achieved without unnecessary machine movements which are both troublesome and pose a risk to the surrounding area. Carrying out as many tasks as possible from one and the same position is both efficient and SAFE!

Excavations in these areas are often associated with a 'lack of space, narrow access and precision excavation'. Engcon's tiltrotators provide an elegant solution to such problems.

Thanks to its ability to rotate and tilt the bucket it's no longer necessary to constantly reposition the machine to get at the job.

Exposing existing cables is no longer difficult. Rotate the bucket through 90 degrees and then tilt it to a suitable angle to excavate beside, under or above an existing cable with the utmost precision.

The need for manual labour is minimized and so too is the risk of injury to personnel in the vicinity.

Tests show that cable trenching using the tiltrotator is up to 40 per cent more efficient, making whole projects more profitable and allowing estimates to be met.

Convert your excavator to a multitasker for use in ways you never thought were possible.

Not only does actual excavation become so much more efficient and profitable with the engcon tiltrotator – thanks to its ability to tilt and rotate the bucket into positions previously impossible – it also minimizes the number of machine repositionings, thus reducing damage to land and increasing site safety.

The amount of spoil is also reduced thanks to its ability to excavate more precisely where required.

And when it's time for backfill you'll note that it's possible to shave off up to 50 per cent of the time, as everything can be performed from one and the same position.

It's the same thing with materials – noticeably reduced material spill also means backfilling is quicker and more profitable.

Road construction involves a number of different work situations, and engcon tiltrotators simplify tasks considerably.

Ditching, stripping, terracing. pipe laying and grapple operations, etc. no longer mean constantly repositioning the machine.

No work demands as much precision and feel as grading.

The grounds and surroundings must be shaped in such a way that they blend in with the local setting.

With an engcon tiltrotator fitted to your machine grading is simplified considerably.