Compatible with your
Our DC2 control system meets the high standards demanded of all components such as hydraulics, electronics and software. Together with Engcon tiltrotators and Q-Safe, the DC2 makes for a safer working environment. DC2 offers the option of track control, wheel steering and boom slew as well as other excavator functions. A smartphone app allows remote support as a complement to PC and USB cable connection. The product meets the ISO 13849-1 safety standard.
• DC2 complies with the new international machine safety standard SS-EN ISO 13849-1
• Fitted with an automatic basic calibration function for quick starts
• Automatically backs up operator settings
• Option of track control, wheel steering, boom slew and other excavator functions
• Function settings and tools can be adjusted using an android phone/tablet with the Microprop App via Bluetooth for up to four different operators
• Controls up to six proportional functions as standard and a further 14 on/off functions with MIG2 joysticks
• Suitable for most machines on the market
• Ability to create adapted tool programmes
The DC2 control system meets all current and known
future safety requirements.
* additional rollers and functions can be accommodated
What is most important for you?
System engcon, centred around the tiltrotator, saves both time and fuel.
Fewer machine transits and less need for manual work increases safety at the workplace.
The tiltrotator's ability to tilt and rotate makes the machine a good all-rounder that carries out most tasks with greater precision.
Fewer machine movements and faster jobs mean less wear on the machine.
Despite the increasing popularity of tiltrotators, many excavator manufacturers do not yet sell 'tiltrotator-ready' machines on certain markets. There are two main considerations when buying a new excavator for use with a tiltrotator - dipper length and hydraulics. Ideally, a shorter dipper should be chosen to take into account the build height of the tiltrotator. For example, if the standard dipper length is 2500mm, choose one 2000mm long so that the extra reach resulting from the addition of the tiltrotator still falls within the manufacturer's safe working range and that there is no chance of the bucket or other attachment hitting the cab when fully crowded.
The standard machine hydraulics can often be used for tiltrotator operation, but the machine controls may not be sufficiently sophisticated to fully exploit the capabilities of the attachment. Tiltrotators are usually supplied with so-called fully proportional control systems. These allow the hydraulic power to be gradually increased according to the needs of the attachment and the task to be completed, for example when pouring type 1 or concrete into a narrow area or using grabs or pallet forks. Non-proportional, or on/off systems which are generally button-operated do not allow the delicacy of control necessary for many tiltrotator operations.
If the excavator has two dual-acting proportionally controlled hydraulic circuits, then basic tiltrotator operation should be possible using the excavator's controls. A third, non-proportional circuit will be required for the tiltrotator hitch. Where a single, dual acting circuit is fitted, it is often more cost-effective to use engcon's DC2 control system which manages the hydraulic switching and flow proportionally within the tiltrotator, rather than have additional circuits fitted.
Among other things, you can use it to adjust tilt and rotation speeds.
The tiltrotator is connected directly to the excavator's arm or beneath the excavator's quick hitch. The tiltrotator is then connected to the excavator's hydraulics and electrical system. Depending on the excavator's extra hydraulics, control is adapted to suit different types of control system. The most common connection takes place via a single or double-acting extra outlet on the arm and the tiltrotator is controlled by a proportional control system known as DC2. The actual control unit is located in the cab (cab module) and the tiltrotator's functions are controlled using our MIG2 – joysticks with rollers that allow the operator stepless control of the tilt, rotation and grip functions if a grapple has been selected for the tiltrotator. Signals from the joystick and the control unit are received by solenoid valves on the tiltrotator thus controlling the function selected.
The pin geometry on your existing buckets is unlikely to be compatible with the S-type coupler fitted to standard tiltrotators. Choosing a Unisafe/PUP coupler to allow you to use your existing buckets is likely to be a false economy for the simple reason that tiltrotator (s-type) buckets are designed for tiltrotator digging. Not only is the angle of the bucket optimised for tiltrotator use, but the bucket geometry (shape, size, etc.) is specific for rotational and angled digging and grading. The saving you make by choosing the S-type coupler can be re-invested in top bracket adapters to convert your existing buckets and other attachments.
If you are running hydraulic tools, you can also purchase adapter brackets EC-Oil ready, or pre-fitted with EC-Oil and thus convert your current hydraulic tools with ease for the S-type coupler.
Yes, but it's not certain that it will be possible to operate three rollers simultaneously.
Yes. Call one of our authorized service partners or us at engcon and we'll connect to your DC2 control system via your smartphone (Android). This lets us read off the fault codes stored to see if any circuit is broken and also adjust your control system to ensure optimal function. Download the 'Microprop' app from Google Play and you're all set for remote support.
404 - Page not found
We couldn't find the page you're looking for.
An error has occurred
Try downloading the page again to see if the error recurs.
An error has occurred
We could not connect you to the Internet